Electrical Industry Control, Electrnic components, Encoder, Servo

Delta ASD-B2-0721-B 750W 220V 1-Phase AC Servo Drive

Name: Delta ASD-B2-0721-B 750W 220V 1-Phase AC Servo Drive
SKU: ASD-B2-0721-B
Price: 498.50 USD
Availability: InStock

Add to wishlist

1. Filling and bottling equipment

2. Feeding machine

3. Electro-discharge machine

4. Lathe

5. Printing equipment

6. Crochet machine 7. Carving machine

$498.50

Delta Electronics’ new high-performance, cost-effective ASDA-B2 series servo motors and drives meet the requirements for general-purpose machine tools and enhance the competitive advantage of servo systems.

Delta ASD-B2-0721-B
Power Supply	Phase / Voltage				Single-Phase: 200 to 255VAC, 50/60Hz 5% Three-Phase: 170 to 255VAC, 50/60Hz 5%
	Permissible Voltage Range				Three-Phase or Single-Phase 220 – 230VAC, -15% to 10T
	Continuous Output Current				5.1Arms
Cooling System					Natural Air circulation (100W – 750W) Fan Cooling (1000W – 3000W)
Encoder Resolution/Feedback Resolution					17-bit (160000 p/rev)
Control of Main Circuit					SVPWM (Space Vector Pulse Width Modulation) Control
Tuning Modes					Auto / Manual
Dynamic Brake					None (100W to 400W) Built-in (750W to 3000W)
Position Control Mode	Max. Input Pulse Frequency				Max. 500Kpps (Line driver) (low speed) / Max. 4Mpps (Line receiver) (high speed) Max. 200Kpps (Open collector)
	Pulse Type				Pulse + Direction, A phase + B phase, CCW pulse + CW pulse
	Command Source				External pulse train / Internal parameters
	Smoothing Strategy				Low-pass and Moving filter
	Electronic Gear				Electronic gear N/M multiple N: 1 – (226 to 1), M: 1 to (231 to 1) (1/50 < N/M < 25600)
	Torque Limit Operation				Set by parameters
	Feed Forward Compensation				Speed Control Mode
Speed Control Mode	Analog Input Command			Voltage Range	0 to ± 10VDC
				Input Resistance	10K
				Time Constant	2.2μs
	Speed Control Range				1:5000
	Command Source				External analog signal / Internal parameters
	Smoothing Strategy				Low-pass and S-curve filter
	Torque Limit Operation				Set by parameters or via Analog input
	Frequency Response Characteristics				Maximum 550Hz
	Speed Accuracy (at rated rotation speed)				0.01% or less at load fluctuation 0 to 100% (at rated speed) 0.01% or less at power fluctuation ± 10% (at rated speed) 0.01% or less at ambient temperature fluctuation 0℃ to 50℃
Torque Control Mode	Analog Input Command			Voltage Range	0 to ± 10VDC
				Input Resistance	10K
				Time Constant	2.2μs
	Command Source				External analog signal / Internal parameters
	Smoothing Strategy				Low-pass filter
	Speed Limit Operation				Parameter Setting or via Analog input
Analog Monitor Output					Monitor signal can set by parameters (Output voltage range: ±8V)
Digital Input / Output			Input		Servo On, Reset, Gain switching, Pulse clear, Zero speed CLAMP, Speed/Torque limit enabled, Emergency stop, Forward/Reverse inhibit limit, Position/Speed mode switching, Speed/Torque mode switching, Torque/Position mode switching, Feed step selection input, Feed step mode input, Auto run input, Electronic gear ratio (numerator) selection
			Output		Encoder signal output (A, B, Z Line Driver/Z Open collector) Servo ready, Servo On, At Zero speed, At Speed reached, At Positioning completed, At Torques limit, Servo alarm (Servo fault) activated, Electromagnetic brake control Homing completed, Output overload warning Servo warning activated, Internal position command completed
Protective Functions					Overcurrent, Overvoltage, Undervoltage, Motor overheated, Regeneration error, Overload, Overspeed, Abnormal pulse control command, Excessive deviation, Encoder error, Adjustment error, Emergency stop activated, Reverse/Forward limit switch error, Full-closed loop excessive deviation, Serial communication error, Input power phase loss, Serial communication time out, short circuit protection of U, V, W, and CN1, CN2, CN3 terminals.
Communication Interface					RS-232 / RS-485
Environment		Installation Site			Indoor location (free from direct sunlight), no corrosive liquid and gas (far away from oil mist, flammable gas, dust)
		Altitude			Altitude 1000m or lower above sea level
		Atmospheric pressure			86kPa to 106kPa
		Operating Temperature			0℃ to 55℃ (if operating temperature is above 45℃, forced cooling will be required)
		Storage Temperature			-20℃ to 65℃
		Humidity			0 to 90% (non-condensing)
		Vibration			9.80665m/s2 (1G), less than 20Hz, 5.88m/s2 (0.6G)
		IP Rating			IP20
		Power System			TNSystem