KEYENCE Calibration Fiberoptic Sensor FS-T2P

1. Condition: original new
2. Response time: 250 μs
3. Weight: Approx 40 g

$47.90

Model		FS-T2P
Type		1-line expansion unit
Light source		Red LED
Sensitivity adjustment/Mode selection		Button
Response time		250 μs
Operation mode		LIGHT-ON/DARK-ON (switch-selectable)
Indicator lamp		Output indicator: Red LED, Stable operation indicator: Green LED Calibration indicator: Orange LED
Timer function		ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)
Input		Non-voltage input (contact, solid state)
Control output		PNP open-collector 100 mA max. (40 VDC max.), Residual voltage: 1 V max.
Stability output		PNP open-collector 50 mA max. (40 VDC max.), Residual voltage: 1 V max.*1
Protection circuit		Reversed polarity protection, over-current protection, surge absorber
Unit expansion		Up to 16 expansion units can be connected (a total of 17 units).*2
Mutual interference suppression		4
Rating	Power voltage	12 to 24 VDC (±10%), ripple (p-p): 10% max.*3
	Current consumption.	35 mA or less
Environmental resistance	Operating ambientluminance	Incandescent lamp: 10,000 lux max.,
		Sunlight: 20,000 lux max.
	Operating temperature range	-10 to +55°C 14 to 131°F, No freezing*4
	Operating ambient humidity	35 to 85% RH (No condensation)
	Vibration	10 to 55 Hz, double amplitude: 1.5 mm 0.06″, 2 hours each in the X, Y and Z axis
	Shock resistance	500 m/s2 in X, Y, and Z directions, 3 times respectively
Case material		Polycarbonate
Weight		Approx 40 g