Electrnic components, Electronic Industrial Parts, Sensor, Switch

Keyence Proximity Switch Sensor AP-V41AWP

1. Condition: original new
2. Repeatability: ±0.2% of F.S. or less
3. Power voltage: 12 to 24 VDC ±10% with ripple (p-p) of 10% max.

$98.00

Description
Reviews

Model				AP-V41AWP
Display power				4 1/2-digit, 2-color, 7-segment LED (Character height: 4.5 mm 0.18″) AI indicator (green) Display cycle: 10 times/s
Set and display range				-15 to +110% of F.S. *1
Operation indicator				Red LED x 2 (corresponding to control output 1 and 2)
Resolution	Standard mode	AP-41M		0.1kPa, 1mmHg, 0.1 inchHg, 0.01psi, 0.001bar
		AP-41
		AP-43		0.01 kgf/cm2
		AP-44		0.1kPa, 1mmHg, 0.1 inchHg, 0.02psi, 0.001bar
		AP-48		0.1 kPa, 0.001 kgf/cm2, 0.02 psi, 0.001 bar
	Focus mode	AP-41M		0.01 inchHg
		AP-41
		AP-43		0.02 PSI
		AP-44		0.02 kPa, 0.2 mmHg, 0.01 inchHg, 0.004 psi, 0.2 mbar
		AP-48		0.02kPa, 0.2gf/cm2, 0.004psi, 0.2mbar
Repeatability				±0.2% of F.S. or less
Hysteresis				Variable (Standard: 0.5% of FS; high-resolution/focus mode: 0.1% of F.S.)
Response time				1 (in high-speed mode only), 2.5, 5, 100, or 500 ms (selectable) *2
(chattering prevention function)
I/O	Control output			PNP open collector 100 mA max. (at 30 V or below) *3 with max. residual voltage of 1 V, 2 outputs (NO or NC selectable)
	Analog output (selectable)			1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
	Zero-shift input (selectable)			―
Display temperature characteristic				±1% of F.S. max.
Unit expansion				―
Rating	Power voltage			12 to 24 VDC ±10% with ripple (p-p) of 10% max.
	Power consumption	At 12 V	Normal	See below.
			Eco mode	600mW (50mA) or less
		At 24 V	Normal	1200mW (50mA) or less
			Eco mode	960mW (40mA) or less
Environmental resistance	Operating temperature range			0 to 50°C 32 to 122°F, no freezing
	Operating ambient humidity			35 to 85%RH (no condensation)
	Vibration			10 to 55 Hz, 1.5 mm 0.06″ double amplitude in X, Y, and Z directions, 2 hours respectively
Material				Polycarbonate
Accessories				End Unit，Head Connector, and Expansion Seal
Weight				Approx. 80 g (with 2-m 6.6′ cable)
*1 The focus range applies while in focus mode only.
*2 A response time of 100 or 500 ms applies if the AP-47 is used.
*3 The maximum current is 20 mA if the AP-V42W (P) is installed as an expansion unit.